Sanden GAUS 160 FQS Heat Pump

Sanden GAUS 160 FQS Heat Pump. Ideal for Smaller Households.

The Sanden Eco® is the most energy efficient hot water heat pump currently available. When you buy a Sanden heat pump, you receive the highest amount of Small-scale Technology Certificates (STCs) of any currently available hot water heat pump system. These STCs can be used to reduce your initial purchase price. For more information, contact us.

Unlike other hot water heat pumps, the Sanden Eco® system uses a smarter split system where the heat pump unit and stainless steel tank are separately situated. This allows easy on-site handling and installation, as well as providing options the storage tank location, which can be up to 4 metres away from the heat pump unit.

Heat Pump Unit

  • A high Coefficient of Performance (COP=4.5^) results in significantly reduced energy use and CO2
  • Up to 50% faster heat recovery than typical heat pumps. In ambient air of 20 ºC it takes approx 4 hours to heat 315 L of water from 17 ºC to 65 ºC.
  • Uses unique Ozone friendly R744 (CO2) refrigerant.
  • Simple installation by Plumber & Electrician, with no Refrigeration Mechanic required.
  • An automatic heating cycle, which makes it perfect for use with Off-Peak tariff.
  • Fitted with in-built freeze protection, making it suitable
for all climates (ie. -10 ºC to +43 ºC operating range).
  • No backup element required.
  • Whisper quiet operation, with industry leading noise
level of 38 dB – very neighbour friendly!
  • High quality, weather resistant construction
for outdoor location.
  • 3 year Warranty.

 

Stainless Steel Tank

  • 3 x tank sizes offered – 160L, 250L and 315L.
  • High quality, Australian made extra long life stainless steel cylinder.
  • Fully insulated for minimal heat loss.
  • Mains pressure rated.
  • 315 litre Tank with two installation options (tall with
a reduced diameter or short with an increased diameter).
  • Safety pressure and temperature relief valve supplied.
  • 15 year Warranty.

Height 2090 mm
Hot Water Outlet & PTR Valve 1850 mm
Heat Pump Return15 1850 mm
Sensor Port82 1330 mm
Cold Water Inlet / Heat Pump Flow 210 mm
Diameter 570 mm
Weight 70 kg approx.
Storage Capacity 315 L

 

Water Connections & Settings
Tank Relief Valve Setting (PTR Valve) 850 kPa
Expansion Control Valve Setting (ECV) 700 kPa
Maximum Mains Pressure Settings
With ECV 500 kPa
Inlet Water Operating Pressure 500 kPa
Adjustable Tempering Valve 1400 kPa max.

Technical Manual

CONTACT